Tectyl Multipurpose Amber (887100)

Tectyl Multipurpose Amber is a wax based, solvent cutback, amber colored corrosion preventive. It has good water displacing and penetration properties, making it very suitable as a versatile corrosion protective for a wide variety of applications: Automotive, Marine, Household and industrial. Tectyl Multipurpose Amber cures to an amber colored, waxy, semi-firm translucent film.

• Superior Protection
  At the recommended DFT Tectyl Multipurpose Amber will protect against corrosion during storage, domestic and overseas transport.
• Inside and outside protection
  Tectyl Multipurpose Amber can protect parts stored outside as well, due to its excellent UV protection.
• Processing
  Tectyl Multipurpose Amber is easy to apply and easy to remove, when no longer needed.
• Economical
  With a Dry Film Thickness of only 50 microns, Tectyl Multipurpose Amber can protect a big surface with just a little amount of the product.

• Surface Preparation: The maximum performance of Tectyl Multipurpose (MP) Amber can be achieved only when the metal surfaces to be protected are clean, dry and free of rust, oil and mill scale and a substrate temperature of 10-35 °C at the time of product application.
• Application: Tectyl Multipurpose Amber gives a maximum performance when it is sprayed at an ambient and product temperature of 10-25 °C. Shake the can well before use and spray at a distance of approximately 30 cm from the surface. Tectyl Multipurpose Amber is fast-drying, and this can cause “pin-holing” when applied too thick at once. It is advised to spray one layer per pass, wait for 2 to 3 minutes and then spray another layer. Continue like this until the required film thickness has been obtained.
• Removal: Tectyl Multipurpose Amber can be removed with mineral spirits or any similar petroleum solvent, hot alkaline wash or low-pressure steam. If dried and cured, the film of Tectyl Multipurpose Amber can also be removed with Tectyl Biocleaner.