No items
DESCRIPTION
Valvoline DPF Cleaner is a tool to loosen and remove ash deposits in diesel-particle filter systems, without disassembly.
Applications
- Diesel-particle filter systems
USAGE ADVICE
- Before use, carefully read the directions on the packaging.
- Valvoline DPF Cleaner should be at room temperature before use. The processing temperature should be between 5 to 30°C.
- Shake before use.
- Before use, allow the engine to cool down (maximum 50°).
- Disassemble the temperature or pressure sensor from the filter.
- Insert the special tube into the opening and empty the can in the following intervals: Spray 3 to 5 times; allow to soak for 5 seconds.
- Install the temperature or pressure sensor.
- Start the engine and allow to run stationary for at least 15 minutes to evaporate most of the fluid.
- Make a test drive of 30 minutes. This may cause the formation to steam.
Health and Environment
- H229 Pressurised container: May burst if heated.
- P101 If medical advice is needed, have product container or label at hand.
- P102 Keep out of reach of children.
- P103 Read carefully and follow all instructions.
- P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
- P251 Do not pierce or burn, even after use.
- P410 + P412 Protect from sunlight. Do not expose to temperatures exceeding 50 °C/ 122 °F.
