DESCRIPTION
Highly effective active solvent especially for cleaning typical contamination and deposits around the air intake and throttle valves.
Applications
- Cleaning of throttle and throttle units
- For making moving parts, including idling actuators accessible
- Cleaning of carburettors (internally and externally)
- Rinsing of bore holes and nozzles
- Only use for petrol engines!
- For better cleaning results it is recommended to dismantle throttle units and similar components in order to be able to clean difficult to access places optimally.
FEATURES AND BENEFITS
- Breaks down resins, oily residues and carbon soiling in the intake area of petrol engines
- A special spraying system delivers high mechanical cleaning performance
USAGE ADVICE
- Liberally spray the whole surface of the parts to be cleaned and allow the agent a few minutes to soak in.
- Rinse off any dislodged dirt by spaying again with product 138.
- Residual agent remains on the surface as a protective layer.
Health and Environment
- H222 Extremely flammable aerosol.
- H229 Pressurised container: may burst open on heating.
- H315 Causes skin irritation.
- H319 Causes severe eye irritation.
- H332 Harmful by inhalation.
- H335 May cause respiratory irritation.
- H336 May cause drowsiness or dizziness.
- H361d Suspected of damaging the unborn child.
- H373 May cause damage to organs through prolonged or repeated exposure.
- P210 Keep away from heat, hot surfaces, sparks, open flames and other sources of ignition. Do not smoke.
- P211 Do not spray into an open flame or other sources of ignition.
- P251 Do not pierce or burn, even after use.
- P260 Do not breathe aerosol.
- P280 Wear protective gloves and eye protection/face protection.
- P302+P352 IF ON SKIN: Wash with plenty of water.
- P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes; remove contact lenses, if possible; continue rinsing.
- P337+P313 If eye irritation persists: consult a doctor.
- P304+P312 IF INHALED: Consult a POISON CENTER/doctor if you feel unwell.
- P410+P412 Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F