No items
DESCRIPTION
For loosening vehicle components that have seized due to corrosion, e.g. injectors or rims on the wheel hub, using an innovative sequestrant reaction. With skin-neutral pH value.
Applications
- Dismantling jammed (rusted) injection valves or injectors
- Rims jammed on the wheel hub
- Jammed screw connections
FEATURES AND BENEFITS
- Breaks down thick layers of rust on surfaces using an innovative sequestrant reaction
- Effective deep-working action into the material thanks to highly degradable special tensides
- Contains glycerine as a lubricating ingredient that is not harmful to humans
- Skin-neutral pH value
- Not corrosive
USAGE ADVICE
- Clean grease and oil from parts.
- Spray generously and direct onto the parts to be loosened.
- Then leave to work for about 30 minutes and rinse off the dissolved dirt by spraying again.
Health and Environment
- H222 Extremely flammable aerosol.
- H229 Pressurised container: may burst open on heating.
- H319 Causes severe eye irritation.
- P210 Keep away from heat, hot surfaces, sparks, open flames and other sources of ignition. Do not smoke.
- P211 Do not spray into an open flame or other sources of ignition.
- P251 Do not pierce or burn, even after use.
- P280 Wear protective gloves and eye protection/face protection.
- P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes; remove contact lenses, if possible; continue rinsing.
- P337+P313 If eye irritation persists: consult a doctor.
- P410+P412 Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F
