No items
DESCRIPTION
Permanently elastic, high-temperature silicone sealant that leaves no marks for use in the automotive sector with improved recipe. For sealing water pumps, oil pumps, oil sumps and housing lids. Neutrally curing, non corrosive. Extremely resistant to engine and gearbox oils, coolant and antifreeze.
Applications
For sealing parts that will be removed again:
- Inlet systems
- Water pumps
- Oil pumps
- Oil pans
- Camshaft bearing cover
- Thermostat housing
- Valve cover
- Front and transmission cover
- Drive axle covers
- Sunroofs
- Doors
- Do not use as a substitute for cylinder head and exhaust manifold seals.
FEATURES AND BENEFITS
- The only oxime silicone sealing compound without carcinogenic ingredients (no-Meko)
- Completely non classified (GHS/CLP)
- Highly resistant against engine and gearbox oil and coolant
- Non-corrosive, can be used on all metals and electronic components (e.g. sensors)
- High dynamic load capacity and age resistance
- Can be used at temperatures from -60°C up to 280°C, intermittently up to 320°C
- No irritating or aggressive vapours
- Excellent adhesion to many materials
USAGE ADVICE
- Remove the old sealing material from the bonding surface.
- The bonding surface must be clean, dry and free from dust.
- Apply 159 to the bonding surfaces of the assembly components and attach within 5 minutes.
Health and Environment
- H222 Extremely flammable aerosol.
- H229 Pressurised container: may burst open on heating.
- P210 Keep away from heat, hot surfaces, sparks, open flames and other sources of ignition. Do not smoke.
- P211 Do not spray into an open flame or other sources of ignition.
- P251 Do not pierce or burn, even after use.
- P280 Wear protective gloves and eye/face protection.
- P302+P352 IF ON SKIN: Wash with plenty of water.
- P333+P313 In case of skin irritation or rash: consult a doctor.
- P410+P412 Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F
