No items
Description
Wynn’s Direct Injection Valve Cleaner is a powerful foam cleaner developed to quickly, easily and safely remove hardened carbon and other contamination from the air intake system, inlet valves, valve seats and combustion chamber rapidly restoring correct engine performance.
Applications
- For all petrol, GDI, Hybrid & Diesel Engines.
- Do not apply to Vehicles where the intercooler is integrated into the inlet manifold.
Features & Benefits
- Cleans Valve stems and seats
- Cleans the combustion chamber and piston crown
- Restore correct airflow to engine
- Restores correct engine operation
Usage advice
Check DPF pressure - If pressure is greater than 50% clean the DPF with Wynn’s On Car DPF Cleaner. If there are signs of excessive inlet manifold contamination manual cleaning is recommended before treatment.
- Diesel Application :
- 1. Set engine at 1,500 – 1,800 RPM
- 2. Apply product directly into the inlet manifold
- 3. Spray in 1-2 second intervals allowing engine to stabilise in between sprays
- 4. After 10 applications allow engine to idle for 3 – 4 minutes
- 5. Repeat No. 3 & 4 above until contents of can are consumed
- 6. After treatment carry out an Oil System Clean (Flush) and change the engine oil and filter
- 7. Carry out road test, do not to exceed 2,500 RPM for the first 10 minutes
- Petrol Application :
- 1. Set engine at 2,500 – 3,000 RPM
- 2. Apply product directly into the inlet manifold
- 3. Spray in 4-5 second intervals allowing engine to stabilise in between sprays
- 4. After 10 applications allow engine to idle for 3 – 4 minutes
- 5. Repeat No. 3 & 4 above until contents of can are consumed
- 6. After treatment carry out an Oil System Clean (Flush) and change the engine oil and filter
- 7. Carry out road test, ensuring full use of RPM rang
- For best results it is also recommended to treat the vehicles fuel system.
- For diesel engines add one bottle of Wynn’s Diesel Extreme Injector Cleaner to the vehicles fuel tank.
- For petrol engines add one bottle to of Wynn’s Gasoline Direct Injection Cleaner to the vehicles fuel tank.
Health and Environment
- H222 - Extremely flammable aerosol.
- H229 - Pressurised container: May burst if heated.
- H315 - Causes skin irritation.
- H318 - Causes serious eye damage.
- H336 - May cause drowsiness or dizziness.
- H411 - Toxic to aquatic life with long lasting effects.
- P261 - Avoid breathing vapours, spray.
- P280 - Wear protective gloves, eye protection.
- P305+P351+P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- P310 - Immediately call a POISON CENTER or doctor/physician.
- P102 - Keep out of reach of children.
- P210 - Keep away from hot surfaces, open flames, sparks, heat. – No smoking.
- P211 - Do not spray on an open flame or other ignition source.
- P251 - Pressurized container: Do not pierce or burn, even after use.
- P410+P412 - Protect from sunlight. Do not expose to temperatures exceeding 50°C/122°F.
- EUH208 - Contains 1-(N,N-Diethanolaminomethyl)-5-methylbenzotriazole, 1-(N,NDiethanolaminomethyl)-4-methylbenzotriazole. May produce an allergic reaction.
